Invita Uniku estrużjoni Pelletizer

Description:  

The granulator adopts double cone forced feeding to feed the mixed dough material forcibly, thus reducing the crushing link of the material and preventing the pollution of the material.

Gearbox:                                            

   Its design adopts the technical specifications stipulated by ZBJ19009-88. The gear and shaft parts are made of high-strength alloy steel. The gear precision is GB 10095-88, Grade 6, and the tooth surface hardness is HRC-60. The output shaft end is equipped with an ultra-standard thrust bearing to bear the back thrust of the screw. The main standard parts such as bearings and oil seals are all made of domestic high-quality products. The whole machine has high bearing capacity, smooth transmission, low noise and high efficiency.

A. reduction ratio: 10:1

B. grinding gear with hard tooth surface, low noise, long service life and reliable operation.     C. oil immersion and sliding system

Screw:      

1. Material:38CrMoALAAlloy steel is nitrided for 72 hours, polished and surface wear-resistanDepth of nitriding layer: 0.6-0.8mm, nitriding hardness: screw 780HV,barrel 850HV
2. screw diameter: φ180mm

C. screw length-diameter ratio: 6: 1

Electrical control:

1. A.  Power Supply:3-AC380V,50HZ
2. B.  5 Zones Temperature Control,Digital Temperature Controller
3. C.  electric control cabinet and main machine are integrated
4. D.  Electrical components:Shihlin/Tend/Fotek/Omron Brands