Un solo tornillo de extrusión peletizadora

Un solo tornillo de extrusión peletizadora

Breve descripción:

Description:  The granulator adopts double cone forced feeding to feed the mixed dough material forcibly, thus reducing the crushing link of the material and preventing the pollution of the material. Gearbox:                                               Its design adopts the technical specifications stipulated by ZBJ19009-88. The gear and shaft parts are made of high-strength alloy steel. The gear precision is GB 10095-88, Grade 6, and the tooth surface hardness is HRC-60. The output shaf...


  • Precio FOB: US $0.5 - 50,000 / Piece
  • Min.Order Cantidad: 1 Unit
  • Capacidad de suministro: 20 sets/month
  • Puerto: Shenzhen
  • Condiciones de pago: 30%T/T,70% Balance before shipment
  • On-site Trainning: Optional
  • Warranty: 12 monthes
  • Post-sale Service: Yes
  • Detalle del producto

    ISO 9001:2015

    CE Certification

    Etiquetas de productos

    Description:  

    The granulator adopts double cone forced feeding to feed the mixed dough material forcibly, thus reducing the crushing link of the material and preventing the pollution of the material.

    Gearbox:                                            

       Its design adopts the technical specifications stipulated by ZBJ19009-88. The gear and shaft parts are made of high-strength alloy steel. The gear precision is GB 10095-88, Grade 6, and the tooth surface hardness is HRC-60. The output shaft end is equipped with an ultra-standard thrust bearing to bear the back thrust of the screw. The main standard parts such as bearings and oil seals are all made of domestic high-quality products. The whole machine has high bearing capacity, smooth transmission, low noise and high efficiency.

    A. reduction ratio: 10:1

    B. grinding gear with hard tooth surface, low noise, long service life and reliable operation.     C. oil immersion and sliding system

    Screw:      

    1. Material:38CrMoALAAlloy steel is nitrided for 72 hours, polished and surface wear-resistanDepth of nitriding layer: 0.6-0.8mm, nitriding hardness: screw 780HV,barrel 850HV
    2. screw diameter: φ180mm

    C. screw length-diameter ratio: 6: 1

    Electrical control:

    1. A.  Power Supply:3-AC380V,50HZ
    2. B.  5 Zones Temperature Control,Digital Temperature Controller
    3. C.  electric control cabinet and main machine are integrated
    4. D.  Electrical components:Shihlin/Tend/Fotek/Omron Brands




  • Anterior:
  • Siguiente:

  • ISO English

    dispersión amasadora

  • Envíe su mensaje a nosotros:

    Investigación ahora
    • * CAPTCHA: Por favor, seleccione el estrella

    Productos relacionados

    Investigación ahora
    • * CAPTCHA: Por favor, seleccione el árbol

    WhatsApp Online Chat !
    WhatsApp Online Chat !